New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Windows & Doors in Boerne, TX | Hale Windows San Antonio
We’re Hale Windows San Antonio, and we provide independent ES Windows service across Boerne, from historic Main Street limestone homes to newer subdivisions off Ranger Creek Road. We are not a manufacturer affiliate. What sets our ES Windows work apart here is simple: we’re the shop that knows how to keep your windows true to Boerne’s strict historic district codes while fixing the failure modes that Hill Country hail and sun create. Call (361) 348-8929 for a free estimate.
Why Boerne Residents Choose Us for ES Windows Service
We’ve been turning wrenches on ES Windows in the Hill Country for over a decade. Our techs are cross-trained on historic Haustein-era casements and modern ES hardware, which matters when you’re working on a 1920s bungalow near the Kendall County Courthouse one day and a 2015 build in the Esperanza subdivision the next. Spencer Odell, our owner, spent two decades measuring, installing, and troubleshooting windows and doors across the Southwest before bringing that experience to Boerne. He’s caught failed glazing seals and hidden frame rot that other installers walked right past. Our ES Windows sales & service team stocks OEM-compatible hardware and has a yard full of salvage-grade materials for older homes. When you call, you get a live person. When we show up, you know exactly who’s coming before the truck stops.
Common ES Windows Windows & Doors Problems We Solve in Boerne
- Thermal seal failure in 700 Series insulated glass after hail impact. Boerne sits in a hail corridor that runs along the Balcones Escarpment. We regularly see 700 Series casements fogging between panes within two to three years of a hailstorm. The impact doesn’t have to shatter the glass to kill the seal. We replace the IG unit and match the original low-E coating so one window doesn’t look different from its neighbors.
- Aluminum frame warping and lock misalignment on 500 Series sliders. Thermal cycling between 100°F summer days and 40°F winter nights slowly twists aluminum frames. Sliders bind, locks stop lining up, and eventually the sash won’t seat. We realign, shim, and replace worn tracks rather than telling you to buy a whole new window.
- Wood cladding rot at sill corners on 400 Series awnings. Older Boerne homes with limestone sills trap moisture behind the cladding. The bottom corners of 400 Series wood-clad awnings are the first place rot shows up. We cut out the bad wood, splice in matching stock, and re-clad so the repair disappears.
- Stripped operator gears on casement windows after hail-storm lock corrosion. Hail dents the frame, water gets into the gear housing, and the next time someone cranks the window, the gear strips. We rebuild operators with OEM cranks and re-lubricate the track.
- Discontinued series hardware failures. ES Windows has changed hardware styles over the years. For older series with no OEM parts left, we machine custom aluminum extrusion in-house and match the original profile. You don’t replace a window for want of a $40 part.
ES Windows Service in Boerne: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic ES Windows page: Boerne’s historic district code requires exact window profile replication on Main Street, down to the 1/8-inch muntin profile. Most suburban window companies read that code once and never look again. Our techs keep old-growth cypress in the yard and custom glass from the same European suppliers that served Hill Country builders 150 years ago. That detail matters when you own a 700 Series casement in a 1920s storefront and the code enforcer is checking your sightlines. It also matters when your ES Windows sash has wavy, non-tempered glass that a big-box shop would happily replace with flat modern glass, destroying the building’s character and potentially failing the historic board’s review. We match the waviness, the muntin width, and the frame profile. This is not something a general contractor who mostly does new-construction vinyl will even notice, let alone handle.
ES Windows Models & Products We Service in Boerne
We service the full ES Windows lineup that shows up in Boerne homes: the 700 Series Aluminum Casement, the 500 Series Aluminum Sliding, the 400 Series Wood-Clad Awning, and the 300 Series Aluminum Picture. We use OEM ES Window hardware whenever it’s still available. For discontinued series, we machine custom aluminum extrusion and source aftermarket dual-pane glass from Texas suppliers that match the original solar heat gain coefficient. We keep a rotating stock of common 700 Series IG units, operators, and lock sets here in the Hill Country so Boerne turnaround doesn’t mean waiting two weeks for a part from the coast. We always run a repair-vs-replace cost analysis upfront. On 400 Series wood-clad windows, we usually restore rather than replace. The historic character is worth more than the price difference, and most Boerne homeowners know that.
ES Windows Service Pricing in Boerne
ES Windows service in Boerne runs $185 to $875 depending on what’s wrong. A stuck 500 Series slider with track realignment is on the low end. A full 700 Series sash rebuild with custom IG glass and an OEM operator runs toward the higher end. Replacing a rotted 400 Series sill corner typically lands between $380 and $700, including the wood splice and re-cladding. Full frame Window Replacement in Boerne starts around $1,450 for a standard 300 Series picture window and goes up from there based on size and finish. We give you a written line-item price before any tool is picked up. That price doesn’t change mid-job. Call (361) 348-8929 and we’ll walk through your windows and what they’ll cost to repair – the estimate is free, and you keep the written quote regardless.
Serving Boerne, TX - Our Local Coverage Area
We’re based in the Boerne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ES Windows Windows & Doors in Boerne
Yes. We keep old-growth cypress stock and work with glass suppliers who can produce wavy, non-tempered replacement units that match the original 1/8-inch muntin profile Boerne’s code requires. We’ve done this on Main Street storefronts and historic bungalows near the Kendall County Courthouse, and the historic board has passed every one. Call (361) 348-8929 and we’ll look at your sash before you touch anything.
Hail dents the aluminum frame and throws the track out of square by a few thousandths of an inch. That’s enough to make the sash catch. The frame also absorbs impact energy, so the lock mechanism can shift even when the pane survives. We realign the track, straighten the frame, and reset the lock. It’s a $215-$350 fix in Boerne rather than a replacement. Call (361) 348-8929 for an exact quote.
Yes, when the existing frame is sound. For 700 Series and 300 Series aluminum frames, we can install impact-rated laminated glass into the original frame and add stainless hardware. This is a growing request in Boerne’s hail corridor, where impact-resistant windows are becoming a practical upgrade rather than a coastal-only feature. Some 500 Series sliders can’t be retrofitted due to narrow frame channels, and we’ll tell you that upfront. Call (361) 348-8929 and we’ll assess your specific windows.
You can usually repair it. We cut out the rotted section, splice in matching wood, and re-clad the corner. The cost in Boerne runs $380 to $700 per window depending on how far the rot has traveled into the frame. We only recommend full replacement when the rot has compromised more than half the sill or the frame is structurally unsound, which is rare on 400 Series awnings. Call (361) 348-8929 for a written evaluation and repair quote.
We disassemble the operator housing, clean the corrosion, and replace the worn gear with an OEM crank when available. If the housing itself is cracked from hail impact, we machine a matching replacement. Most stuck operators in Boerne are a $185-$320 our Window Repair in Boerne. Call (361) 348-8929 and we’ll get your casement cranking again – estimates are free.
Service Areas Near Boerne
We serve Boerne and the surrounding Hill Country communities. Our Boerne service area covers the historic district, Ranger Creek Road, Esperanza, and neighborhoods along Herff Road. We also run calls to ES Windows service in San Antonio for clients with homes in the Dominion and Shavano Park. If you’re east of Boerne, ES Windows service in Live Oak is where we handle warranty work and seal replacements for newer builds. We cover Bulverde and Cibolo on the same dispatch schedule.
Book Your ES Windows Service in Boerne Today
If your ES Windows are fogging, binding, or showing rot, we’ll send a background-checked, photo-badged technician to your Boerne home with a written price in hand before any work starts. Call (361) 348-8929 today. Spencer and the team handle ES Windows repair and replacement across Boerne every week, and we’ll get yours on the schedule.
Written by Spencer Odell, Owner at Hale Windows San Antonio, serving Boerne ES Windows owners with independent repair and restoration since 2009.
Six Reasons Homeowners Choose Hale Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.