New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Door Installation: The San Antonio Owner’s Guide
Replacing or installing an ES Windows door in San Antonio typically costs $380 to $1,450 for the installation labor alone, with most full door replacement jobs landing between $1,200 and $4,800 depending on the door type, size, and hardware. We stock ES Windows-compatible parts on our trucks and can usually schedule most door installation work within three to five business days. Most San Antonio homeowners call us after noticing the door sticking at the bottom edge, a latch that no longer catches cleanly, or a panel that has started dragging against the frame when the afternoon heat swells the slab.
Which ES Windows Models This Applies To
ES Windows builds sliding glass doors, hinged French doors, and multi-panel stacking door systems sold through window and door dealers across Texas. The doors fall into several series lines that differ by frame depth, glass pack thickness, and roller hardware. The most common ES Windows door installations we handle in San Antonio are their sliding patio doors and the wider multi-slide stacking systems, though we also replace hinged ES Windows entry and interior doors.
Here’s what matters for compatibility: ES Windows doors use an aluminum frame profile that varies between 1-3/4 inches and 2-1/4 inches deep, depending on the series. You cannot swap a roller assembly from one series into another and expect the door to ride at the correct height. The label you need is on the door panel edge or the top rail: look for the ES Windows name, the series code, and a manufacture date. When OEM parts are no longer available for older ES Windows doors, we use quality aftermarket equivalents matched to the exact frame profile and glass weight, but we’ll tell you before any work starts which way we’re going and why.
Signs Your ES Windows Door Installation Is Failing
- The door scrapes or drags at the bottom or top rail. Roller assemblies wear out, and San Antonio’s fine limestone dust works into the tracks and grinds the roller bearings down faster than you’d expect. What starts as a scrape becomes a gouge in the track if left alone.
- The latch or deadbolt no longer lines up with the strike plate. Aluminum frames expand in triple-digit heat, and over time the panel drifts out of square. Adjusting the hinges or roller height usually fixes alignment, but worn hinge pins need replacement, not a shim.
- The panel sticks when you try to open or close it. This is often frame swelling from moisture intrusion at the sill, a problem we see regularly in older San Antonio homes where the original door pan flashing has degraded. The door isn’t failing; the seal around it is.
- You see daylight or feel air moving around the panel edges. Weatherstripping on ES Windows doors compresses and hardens after years of Texas heat. Replace the weatherstripping before water rides the same gap.
- The door is visibly sagging when open. A door panel that drops at the handle side has a hinge or roller problem that worsens every time someone uses the door. Catching it early keeps the frame from taking damage.
Replacement Cost & What’s Included
For an ES Windows door installation in San Antonio, here’s the honest pricing picture we give every homeowner before we start.
- Roller replacement: $180 to $340 installed, including removing the panel, replacing both sets of rollers, cleaning the track, and re-hanging the door to correct height and alignment.
- Weatherstripping replacement: $120 to $280 installed, depending on how many sides need new seals and whether we’re replacing the threshold cap too.
- Hinge replacement or alignment: $150 to $320 installed for hinged ES Windows doors.
- Full door installation (new pre-hung ES Windows door): $380 to $1,450 for labor, with the door panel itself typically running $800 to $3,300 depending on glass pack, finish, and size.
Every number above includes the written price before work begins, the parts, the labor, haul-away of the old components, and our written workmanship warranty. If the repair fails within 365 days, the second visit is free under the 365-Day Done Right Promise. No change orders, no surprises on the invoice.
DIY or Call Us?
There’s a short list of things any San Antonio homeowner can safely check before picking up the phone. Run a flashlight along the track and clean out the grit with a vacuum and a dry cloth. Look for an obvious obstruction or a loose screw on the handle. That takes five minutes and costs nothing.
What we don’t recommend is removing an ES Windows sliding panel on your own. Those glass packs are heavy, some panels weigh 150 pounds or more, and lifting one out of its track without the right equipment is how people hurt their backs, shatter the glass, or both. Door panels are under constant tension from their own weight, and a panel that slips during removal can do real damage to you or to the wall behind it. If you’re seeing any of the symptoms above and you want it matched, priced, and installed by someone who handles ES Windows doors every week, call us at (361) 348-8929 and we’ll get you a written quote before any work starts.
FAQs
An ES Windows door frame can last 20 to 30 years in San Antonio’s climate, but the moving parts and seals typically need replacement every 7 to 12 years. Rollers, weatherstripping, and latch hardware wear faster here because of the heat cycling, dust, and humidity swings. Call (361) 348-8929 and we’ll tell you honestly whether your door needs a part swap or a full replacement.
Yes, in most cases. We replace rollers, hinges, weatherstripping, tracks, and hardware on ES Windows doors all the time, and a good repair can add 8 to 10 years of life to the door you already own. The exceptions are severe frame rot at the sill or glass seal failure, where replacement starts to make more sense. A phone call to (361) 348-8929 gets you a straight answer on which path fits your door.
A roller, hinge, or weatherstripping replacement on an ES Windows door takes 1 to 2 hours on site. A full pre-hung door installation typically takes half a day, including the finished trim-out and haul-away. Spencer Odell and his crew plan each job so you know the time window before we arrive, not after.
We keep the most common ES Windows roller assemblies, weatherstripping profiles, and hinge sets stocked on our trucks for same-visit replacement in San Antonio. For less common parts or full door panels, we order from our supplier network and schedule the install once the correct part is confirmed in hand. Alongside ES Windows, we also carry parts for PGT, CGI, and CWS doors, which covers a lot of what’s installed out here in San Antonio.
Written by Spencer Odell, Owner, Hale Windows San Antonio at Hale Windows San Antonio, serving San Antonio and nearby areas.
Six Reasons Homeowners Choose Hale Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.