New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Installation: The San Antonio Owner’s Guide
If you have an ECO Window Systems window that’s fogged, leaking, or simply won’t open without a fight, this page is for you. We stock ECO Window Systems-compatible parts and install replacement glass, sashes, balances, and full window units throughout San Antonio, with most repairs completed in a single visit. Typical ECO Window Systems window installation in San Antonio runs $275 to $850 per window depending on whether we’re replacing a balance, a sash, or the entire unit. The way most San Antonio homeowners discover they have a failed part is simple: one morning the window won’t stay up, or the glass looks permanently steamed over after a rain, or there’s daylight showing through a corner that used to seal tight.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds aluminum and vinyl window lines sold across Texas and the Gulf South, and the parts compatibility depends heavily on which series you have. The most common we see in San Antonio homes are the ECO 7000 series (aluminum single-hung and horizontal sliders, popular in 1990s and early 2000s construction) and the ECO 8000 series (vinyl replacement windows, many installed during the mid-2000s remodel boom). You’ll find a small sticker or etched code on the inside of the frame, usually near the top corner. It will list a series number and sometimes a date code. That series number matters more than the year, because ECO changed balance shoe sizes between the 7000 and 8000 lines, and a balance from one will not seat in the other.
When we source parts, we look at three things: the series stamp, the exact sash dimensions to the sixteenth of an inch, and the balance channel width. For glass replacement, we match both the thickness and the low-E coating type (a thin coating that blocks heat while letting light through). ECO used at least two different low-E glass suppliers over the years, and mixing them creates a visible color shift from inside the house. On the OEM versus aftermarket question, ECO Window Systems is still an active brand, but factory parts can take two to four weeks to arrive and cost 30 to 50 percent more than quality aftermarket equivalents. For balances, shoes, locks, and weatherstripping, we typically recommend the aftermarket route: same dimensions, same function, faster install, lower price. For insulated glass units, we order from a San Antonio-area fabricator that matches the original coating and spacer system. We’re an independent service provider, not affiliated with ECO Window Systems, so we’re free to recommend the part that actually makes sense for your window and your budget.
Signs Your ECO Window Systems Window Installation Is Failing
- Fog or condensation trapped between the panes. This means the insulated glass seal has failed. In San Antonio’s heat, the desiccant inside the spacer bar saturates within a few seasons once the seal goes, and no amount of defogging spray will fix it permanently. The glass unit needs replacing.
- The sash drops when you let go, or won’t stay in the raised position. The constant-force or block-and-tackle balances inside the side channels have lost tension or snapped. ECO windows from the 7000 series typically fail at the balance shoe first, which is why the window drops a few inches but doesn’t fall completely.
- You can see daylight at the corners or feel a draft on windy days. The weatherstripping wool pile in the sash channels has compressed, or the sash has shifted out of square. This is the most common complaint we hear in older San Antonio neighborhoods like Jefferson and Beacon Hill, where original aluminum frames have been working against the heat for decades.
- The lock no longer meets, or you have to force it. The keeper and cam on ECO single-hungs are made from cast zinc and wear down over years of use. When the lock is forced, it cracks the sash frame around the mounting screws, which turns a $30 hardware fix into a full sash replacement.
- The window operates fine but is hot to the touch in summer. That’s a failed low-E coating or a single-pane unit in a west-facing wall. We see this constantly in homes on San Antonio’s north side, where afternoon sun punishes any glass without a working thermal barrier. Replacement with a current low-E unit drops surface temperature noticeably.
Replacement Cost & What’s Included
Here’s what ECO Window Systems window installation and repair costs in San Antonio, including parts and labor:
| Service | Typical Installed Price Range | What’s Included |
|---|---|---|
| Balance replacement (single sash) | $95 to $185 | New balance assembly, shoe, and pivot bar; sash adjusted and tested |
| Sash replacement (no glass) | $175 to $320 | New ECO-compatible sash frame, weatherstripping, lock reinstallation |
| Insulated glass unit replacement | $240 to $480 | Custom-cut low-E glass to match original coating, new spacer, glazing |
| Full window unit replacement | $550 to $850 | New ECO or equivalent window, removal of old unit, flashing, trim, interior finish |
The range depends on three things: the series you have (7000-series balances and hardware cost less than 8000-series because parts are more plentiful), the sash dimensions (anything wider than 36 inches jumps into a custom price tier), and whether we find hidden frame damage once the old part comes out. Every quote is written, itemized, and handed to you before any work starts. You’ll see the part cost and the labor as separate lines, and the number we give you is the number you pay. Every repair carries a written guarantee, and if it fails within that guarantee period, the second visit is free. That’s not negotiable, it’s just how we run jobs in San Antonio.
DIY or Call Us?
There are a few things you can safely check yourself. You can confirm the series code on the frame sticker. You can measure the visible glass width and height to the sixteenth of an inch. You can check whether the window is level in the opening with a $6 torpedo level from the hardware store. Those details help us quote accurately over the phone. What you should not attempt is removing a sash that still has spring-loaded balances attached. The tension in an ECO constant-force balance is enough to remove a fingernail or worse if it releases while you’re holding the frame. We’ve also seen DIYers drill into a vinyl sash to “fix” a lock and crack the corner weld, which means a new sash instead of a new lock. If the part is a handle, a crank operator, or a removable tilt-in sash with the tension released, a careful homeowner can handle it. If it involves glass removal or spring tension, call us at (361) 348-8929 and let one of our techs handle it. As Spencer Odell likes to say, “A window that leaks air in July is costing you money every single day – let’s just fix it.”
FAQs
In San Antonio’s climate, ECO Window Systems aluminum windows typically last 20 to 30 years before the frames show serious wear, while the vinyl lines run 25 to 35 years. The glass seals, however, usually fail at the 10 to 15 year mark, especially on west-facing walls that take direct afternoon heat. You don’t need to replace the whole window when the seal goes – just the glass unit. Call (361) 348-8929 and we’ll tell you what makes sense for your specific windows.
Some parts can be repaired, but most are designed as replaceable components. A bent lock cam can sometimes be reshaped, but a cracked balance shoe or a failed glass seal cannot be meaningfully repaired. The good news is that replacing a balance or a glass unit is usually cheaper than people expect, and it restores the window to proper function for years. We’ll give you an honest recommendation and a written price before any work starts.
Most ECO Window Systems repairs, including balance and glass replacement, are finished in 60 to 90 minutes per window. A full window unit replacement runs two to three hours including trim and cleanup. We schedule San Antonio jobs in tight windows so you’re not waiting around all day, and we’ll tell you the expected timeframe when we confirm the appointment.
We stock common ECO balance assemblies, shoes, locks, and weatherstripping on our trucks, along with compatible hardware for PGT, CGI, and CWS windows. Custom glass units are ordered from a San Antonio fabricator and typically arrive within three to five business days. If you call with your series code and measurements, we can often tell you right then whether we have the part in hand.
If you have an ECO Window Systems window that’s fogged, drafty, or won’t stay up, call Hale Windows San Antonio at (361) 348-8929 for a free estimate. A live person answers every call, 24 hours a day. We’ll put the price in writing before any work begins, and every job is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right, no argument needed.
Written by Spencer Odell, Owner, Hale Windows San Antonio at Hale Windows San Antonio, serving San Antonio and nearby areas.
Six Reasons Homeowners Choose Hale Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.