New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Repair in San Antonio: What to Know First
CGI window repair in San Antonio typically runs $145 to $485 for common fixes like failed seals, fogged glass, or damaged hardware, and most jobs are completed in one visit of 60 to 90 minutes per window. We’re an independent CGI service provider, not a manufacturer-authorized shop, which means we evaluate your window honestly and use OEM or quality aftermarket parts based on what actually serves you, not what a brand program dictates. If you own CGI windows in San Antonio and something’s wrong, call (361) 348-8929 and we’ll give you a written price before any work starts.
How CGI Products Fail, and How We Fix Them
- Fogged glass on the CGI Estate Collection. San Antonio’s humidity and triple-digit summers punish double-pane seals, and we see Estate Collection units with broken seals more than any other CGI line in this market. The fix is an insulated glass unit replacement, typically $180 to $340 per window, done in place without pulling the whole frame.
- Roller and balance failures on CGI Classic sliding windows. The Classic series uses a steel roller on an aluminum track. Years of San Antonio dust and hard water grit the rollers, and windows start to drag or jump. We replace the roller assemblies and clean the track, usually $95 to $185 per window.
- Hardware corrosion on CGI impact-rated casements. Casement hardware near kitchens or bathrooms corrodes faster in San Antonio because of our humidity swings. Crank operators and locking points get stiff, then seize. We replace the operator and multi-point lock hardware, typically $220 to $410.
- Weep system blockages on CGI fixed and picture windows. Water that can’t drain through clogged weep holes in San Antonio’s heavy spring storms backs up, rots the sill, and stains drywall. We clear the weeps, repair or replace sill gaskets, and reseal the frame, $120 to $275 depending on sill condition.
- Weatherstripping degradation across the CGI product line. San Antonio’s UV load is brutal on the flexible seals CGI uses at sashes and meeting rails. When those seals flatten, air leaks in and your AC bill climbs. We replace the weatherstripping with a matching profile and rebalance the window, $60 to $180 per opening.
Our CGI Window Repair Process
- 1
Call or schedule. A live person at (361) 348-8929 answers, 24/7. You tell us what’s wrong, we set a time.
- 2
Threshold check. Before we walk up, you have our technician’s name and photo, background-checked and identity-verified. That’s the Threshold Standard, and we don’t skip it.
- 3
Diagnosis. The tech inspects the window, identifies the exact failure, and writes a price on the spot. You approve before any tool comes out.
- 4
Parts decision. We tell you if OEM or a quality aftermarket part makes more sense for your CGI window, and why. The price stays the same either way, fixed in writing.
- 5
Repair and test. We do the work, then run the window through full travel, lock engagement, air-seal check, and visual alignment.
- 6
Guarantee. Every repair carries a written guarantee, and the job is backed by our 365-Day Done Right Promise. If it fails, the second visit is free.
What CGI Window Repair Costs in San Antonio
A broken seal on a CGI window in San Antonio usually runs $180 to $340. Hardware replacement lands between $95 and $410 depending on whether it’s a roller, a crank operator, or a full multi-point lock. Sill gasket work, if water has been sitting, runs $120 to $275. What moves the price: window size, whether the glass is impact-rated, and whether the frame itself needs repair versus just the parts inside it. We give you a written price before work starts, so the number on the quote is the number on the invoice. Call (361) 348-8929 to schedule a free estimate.
Why San Antonio Homeowners Call Hale Windows San Antonio for CGI Work
We’ve been doing this since 2009, and Spencer Odell has been pulling 1970s aluminum frames out of San Antonio houses long enough to know exactly what’s behind your CGI windows and how it interacts with our heat, our humidity, and our thunderstorms. We service eight product lines, PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so we’re not pushing one brand, we’re fixing the window you’ve got. Every repair has a written guarantee, every visit starts with a name and a photo, and if we don’t do it right, we make it right under our 365-Day Done Right Promise. A window that leaks air in July is costing you money every single day, let’s just fix it.
FAQs
No, not when we do it. As an independent CGI service provider, we work warranty-safe: we don’t alter the frame, we match the glass and hardware specifications, and we document every step. If your window is still under CGI warranty, we’ll help you understand what the warranty covers and handle the repair so you stay protected.
Most common CGI parts, rollers, balances, cranks, weatherstripping, and standard insulated glass units, are available within 5 to 10 business days in San Antonio. Some impact-rated laminated glass and specialty hardware can take 2 to 4 weeks. We’ll tell you the lead time up front before you approve anything.
For common repairs like weatherstripping, roller replacement, and hardware swaps, we can often complete the work same-day if the parts are on hand or locally available. Glass replacement typically takes longer because the unit is ordered to size. Call (361) 348-8929 and we’ll tell you what’s realistic for your specific window.
Repair makes sense when the frame is sound, the glass is intact, and the failure is isolated to a seal, a roller, or a piece of hardware. Replacement makes sense when the frame is rotted, the window has multiple failures, or you’re paying for repairs every year. We’ll give you an honest read and a written price for either path, and we’ll tell you straight if repair is throwing good money after bad.
Look for a small etched label or sticker in the corner of the glass or on the edge of the sash, it usually names the series, like Classic, Estate, or Sentinel. If it’s worn off, our technician can identify the series from the frame profile, hardware, and glass construction during the visit. Knowing the series helps us order the right parts the first time.
Contact Hale Windows San Antonio for CGI Window Repair
If your CGI windows need work, call (361) 348-8929 for a free estimate. A live person answers, we schedule a time, and you get a written price before any work begins. We serve San Antonio and nearby areas, and we’ll tell you exactly who’s coming to your door before we knock.
Written by Spencer Odell, Owner, Hale Windows San Antonio at Hale Windows San Antonio, serving San Antonio and nearby areas.
Six Reasons Homeowners Choose Hale Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.