New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Boerne, TX | Hale Windows San Antonio
We’re an independent Therma-Tru service provider, and yes, we work on every Therma-Tru entry door and window system installed across Boerne. What separates us from a dealer showroom is simple: our techs see how Therma-Tru products actually fail here, in this Hill Country climate, after ten years of hail cycles and UV exposure. We don’t just sell them – we handle Window Repair in Boerne, match them to Boerne historic district codes, and tell you straight when a door slab isn’t worth saving. Call (361) 348-8929 for a written estimate before any work starts.
Why Boerne Residents Choose Us for Therma-Tru Service
Spencer Odell, owner at Hale Windows San Antonio, spent two decades measuring, installing, and troubleshooting windows and doors across the Southwest before building his crew here. That background matters when a Therma-Tru Classic-Craft door on a Boerne limestone home has hairline cracks running through the fiberglass skin, or when a Smooth-Star threshold seal has compressed so badly that daylight shows under the sweep. We’ve rebuilt enough of these entry systems to know which failures are worth repairing and which slabs need replacing outright.
Our techs carry genuine Therma-Tru replacement panels, sill components, and glass inserts, because the geometry has to be exact. When OEM parts are discontinued or priced unreasonably, we source aftermarket weatherstripping and hinges that hold up under Boerne’s heat. Every job gets a written price before tools come out, and every repair carries a written guarantee. If a repair fails, the second visit is free. That’s the 365-Day Done Right Promise, and we put it on every job.
Common Therma-Tru Windows & Doors Problems We Solve in Boerne
- Cracked or warped fiberglass door skins on Classic-Craft units. Boerne gets real hail. A 2-inch stone at 60 miles per hour will bruise a fiberglass skin, and prolonged UV exposure on west-facing entries causes delamination from the polyurethane core. We’ve seen this on homes throughout the newer subdivisions along Ranger Creek Road, where afternoon sun beats on front doors without porch cover.
- Failed weatherstripping and threshold seals on Smooth-Star doors. Texas heat cooks rubber seals until they lose their memory, which means drafts in January and scorpions finding their way inside in July. Boerne homes near Cibolo Creek get the added humidity that accelerates threshold gasket rot.
- Loose or sagging hinges on heavy 3-panel sliding doors. These Therma-Tru units are heavy by design, and the original hinge screws often strip out of soft pine jambs after a few thousand open-close cycles. We remove the door, repair the jamb with hardwood blocking, and re-hang it to factory tolerances.
- Spontaneous glass pane fractures on Pulse Series doors. This one surprises Boerne homeowners. Micro-fractures starting at the glass edge seals eventually grow until a temperature swing from a Hill Country cold front finally pops the pane. We replace the insert with genuine Therma-Tru or matched aftermarket glass, depending on what’s available.
- Binding at the top latch corner on Smooth-Star doors during summer. Fiberglass expands and contracts with Boerne’s triple-digit afternoons and 40-degree winter mornings. A door that passes the dollar-bill test in February may bind in August. We adjust hinge positions, plane reveals, and replace warped weatherstripping to restore a clean swing.
Therma-Tru Service in Boerne: What Local Conditions Mean for Your Equipment
Boerne’s historic district presents a problem no big-box installer wants to touch: replacement front doors on Main Street and along the streets just off it must match the original profile exactly, down to true divided lites and wood species. You can’t simply swap in a smooth fiberglass slab and call it done – the design review board will flag it. That’s why we regularly pair a Therma-Tru fiberglass slab with custom cypress brickmold and period-appropriate glass so the entry reads as original from the street. A stock Therma-Tru Classic-Craft in a Chestnut finish, fitted with the right divided-lite insert and trimmed in cypress, can pass review where a generic replacement would get rejected. That’s not a trick; it’s knowing what the board looks for.
We’ve also seen what Boerne’s UV exposure does to aftermarket weatherstripping that was never rated for 100-degree summers. The result is a door that seals in October and leaks by March. On older 1970s-era homes along Johns Road, where original door frames have settled out of square, we take extra care shimming and squaring before hanging a new Therma-Tru slab, because a fiberglass door has no flex to absorb a crooked jamb.
Therma-Tru Models & Products We Service in Boerne
We service the full Therma-Tru residential lineup, including Classic-Craft Fiberglass Entry Doors, Smooth-Star Fiberglass Entry Doors, the Fiber-Classic Oak Collection, and Pulse Series Satin Etched Glass inserts. We stock common replacement parts in our San Antonio shop for fast Boerne turnaround: threshold caps, corner pads, sweep inserts, hinge kits, and glass retaining trim. When a factory-matched slab is needed, we order direct from Therma-Tru distribution and typically have it in hand within a week. If a part is discontinued, we’ll tell you honestly and recommend either an aftermarket equivalent or a full Boerne Window Replacement, depending on what the door slab actually needs.
Therma-Tru Service Pricing in Boerne
Here’s what Boerne homeowners typically pay for common Therma-Tru work:
- Weatherstripping and threshold seal replacement: $120-$280
- Hinge replacement and door re-hanging: $180-$400
- Pulse Series glass insert replacement: $300-$600
- Full door slab replacement (factory-matched): $1,200-$2,800 installed
- Historic district compliance package (slab, cypress brickmold, period glass): $2,000-$3,500
Your exact price depends on door model, slab condition, and whether we’re matching an existing finish or replacing the entire unit. Every estimate is written, line-item, and fixed before work begins. No surprises on the invoice. Call (361) 348-8929 and Spencer will walk you through what your specific door needs.
Serving Boerne, TX - Our Local Coverage Area
We’re based in the Boerne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Boerne
Yes, but not without planning. The Boerne historic district design review board requires that replacement front doors match the original profile, including divided lites and wood species. We pair a Therma-Tru fiberglass slab with custom cypress or pine brickmold and period-appropriate glass inserts so the door passes review. This is a standard job for us on Main Street and the surrounding historic blocks. Call (361) 348-8929 for an exact quote on your specific address.
Spontaneous fractures almost always trace back to micro-fractures that began at the glass edge seals during manufacturing or a prior impact. Over months or years, thermal cycling from Boerne’s hot afternoons and cold Hill Country nights expands those fractures until the pane finally fails. It’s not a warranty issue we can resolve with Therma-Tru directly, but we can replace the insert with a matched unit that fits your existing door frame. Estimates are free.
Fiberglass flexes on impact, which prevents the deep dents steel doors get, but severe hail can still bruise or crack the outer skin. We’ve pulled delaminated Classic-Craft skins off doors after storms that barely scratched neighboring steel units. If your door took a beating, we’ll inspect the slab for subsurface fractures, replace the glass if needed, and give you a written recommendation on repair versus replacement.
In most cases, yes. We can retrofit impact-rated glass inserts, upgrade hinge hardware, and reinforce the jamb-to-stud connection so the assembled door meets the current wind load requirements for Boerne’s exposure category. The work is documented, and if applicable, we pull the permit and handle the inspection. Call (361) 348-8929 for a free evaluation.
Fiberglass expands when it gets hot, and Boerne’s summer sun can push a door that was hung in cooler weather out of square. The fix is usually adjusting the hinges, shaving a reveal, or replacing swollen weatherstripping rather than replacing the door. We do this in one visit. Call us and we’ll tell you over the phone whether it sounds like a binding issue or something else.
Service Areas Near Boerne
We run Therma-Tru service calls throughout the Boerne area, including Fair Oaks Ranch, Bulverde, Leon Springs, and along the I-10 corridor into San Antonio. Our full coverage includes Therma-Tru service in San Antonio and Therma-Tru service in Live Oak. We also provide Boerne service area coverage for all window and door brands we carry.
For more on our Therma-Tru expertise, see Therma-Tru sales & service.
Book Your Therma-Tru Service in Boerne Today
Call (361) 348-8929 to schedule your free Therma-Tru estimate in Boerne. We’ll put the price in writing before any work starts, send a technician whose name and photo you’ll have before arrival, and stand behind the repair with our 365-Day Done Right Promise.
Written by Spencer Odell, Owner at Hale Windows San Antonio, serving Boerne since 2009.
Six Reasons Homeowners Choose Hale Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.