New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
How Much Does Patio Door Installation Cost in San Antonio?
Patio door installation in San Antonio typically costs between $1,800 and $5,400 for a standard sliding glass door, including the door, labor, and basic finishing work. Higher-end options like French doors, multi-slide doors, or premium brands such as PGT or Therma-Tru run between $5,000 and $12,000 installed. Most San Antonio homeowners spend about $2,500 to $3,800 on a mid-range sliding patio door with professional installation.
That’s the honest range. No bait pricing, no mystery fees. Below, we break down exactly where those dollars go, what moves the number up or down, and what you should expect from a contractor in this market before you sign anything.
Patio Door Installation Cost Breakdown (2026)
Here’s what a patio door installation in San Antonio actually costs by component. These figures come from current market rates across the city, from Alamo Heights to Stone Oak to the Far West Side.
| Cost Component | Low Range | High Range | Notes |
|---|---|---|---|
| Standard sliding patio door (60″ x 80″) | $800 | $2,200 | Vinyl frame, double-pane glass |
| Premium sliding door (PGT, CGI, Therma-Tru) | $2,200 | $5,000 | Impact-rated, low-E, reinforced frames |
| French patio doors (pair, hinged) | $1,500 | $4,500 | Two doors, often pre-hung |
| Multi-slide or telescoping door | $6,000 | $15,000+ | Custom sizing, heavy glass panels |
| Labor and installation | $600 | $2,500 | Includes demo of old door, framing adjustments, sealing |
| Disposal of old door | $75 | $250 | Often bundled by full-service installers |
| Permit (if required) | $150 | $400 | Depends on scope; structural changes trigger permits |
| Stucco or brick repair around opening | $200 | $1,200 | Common in older San Antonio homes |
San Antonio’s housing stock skews older. Homes built in the 1960s through 1980s through neighborhoods like Jefferson, Woodlawn Lake, and parts of the Northeast Side often have non-standard rough openings. That means the old door frame may not match a modern door’s dimensions, and your installer may need to reframe the opening. Expect to add $300 to $800 for reframing on older homes. Newer construction in places like Cibolo, Schertz, or the far Northwest Side tends to have standard openings, which keeps labor costs toward the lower end of the range.
One thing we see regularly in San Antonio: stucco and brick exteriors complicate patio door replacement. Unlike siding, you can’t just caulk a gap and paint over it. If the new door’s frame doesn’t match the existing opening exactly, you’ll have masonry or stucco patching to contend with. That’s real money, and it’s why some cheap quotes jump a week into the job. A written price, delivered before work starts, should account for this. At Hale Windows San Antonio, that’s exactly how we quote: you get the full number on paper before anyone picks up a tool.
What Affects Patio Door Installation Pricing in San Antonio
Five things move the price on a patio door install more than anything else in this market. Here they are, in order of impact.
- Door type and material. Vinyl sliding doors are the entry point. Aluminum-clad wood, fiberglass, and impact-rated doors from PGT or CGI cost meaningfully more. A basic vinyl slider might run $800 for the door itself; an impact-rated PGT sliding door can hit $3,500 before labor.
- Glass package. Low-E glass (a thin coating that blocks heat while letting light through) is practically standard in San Antonio. Without it, your patio door turns into a solar oven from May through September. Add $150 to $450 per door for low-E. Impact glass, which protects against hail and storm debris, adds $1,000 to $2,500.
- Permits and scope of work. Swapping a door in the same opening usually doesn’t require a permit in San Antonio. Enlarging the opening, moving walls, or adding a header does. Structural changes mean permits, engineering review, and more labor. That’s a $500 to $1,500 swing.
- Exterior finish work. As mentioned above, brick and stucco homes require careful trim work around the new frame. Budget $200 to $1,200 for this depending on the condition of the existing opening and how much patching is needed.
- Access and site conditions. Second-story patio doors, tight stairwells, or doors in hard-to-reach areas of the house add labor. A ground-floor slider install in a typical San Antonio ranch-style home is the cheapest scenario. A second-story install with narrow access adds $200 to $500.
You should also understand that San Antonio’s climate, specifically the intense UV exposure and summer heat, means cheap glass is a false economy. A door without a low-E coating will have you running the AC harder and watching your CPS Energy bill climb. Proper glass matters more here than it does in most of the country.
Sliding Doors vs. French Doors vs. Multi-Slide: How the Choice Changes Your Budget
The type of patio door you pick is the single biggest cost driver. Here’s how they compare in San Antonio’s market.
Sliding Patio Doors: $1,800 to $4,500 installed
Sliding doors are the workhorse of San Antonio patio access. They’re affordable, they don’t swing into your living space, and modern options come with smooth, durable rollers. Vinyl sliders dominate the budget end. When you step up to reinforced aluminum or impact-rated sliders from brands like PGT or CGI, you’re paying for wind resistance and security. Given San Antonio’s occasional severe thunderstorms and hail, impact-rated sliders are worth a serious look.
French Patio Doors: $2,500 to $6,500 installed
French doors, a pair of hinged doors that swing open from the center, offer a wider opening than a standard slider. They’re popular in older, more traditional homes in neighborhoods like Monte Vista and Terrell Hills. The tradeoff: they need swing clearance, so your patio or interior room must have space for the door arc. Fiberglass French doors from Therma-Tru resist San Antonio’s heat and humidity better than wood, which can warp in our summers.
Multi-Slide and Telescoping Doors: $7,000 to $20,000+ installed
Multi-slide doors, sometimes called pocketing or telescoping glass walls, are a premium product. They open entire walls to the outdoors. Prices climb fast because the hardware, track systems, and glass panels are heavy and precision-engineered. These are niche installs, often in custom homes in The Dominion, Cordillera Ranch, or newer builds in the Texas Hill Country. If you’re considering one, budget on the high end and expect a longer lead time.
Average Patio Door Installation Costs by San Antonio Area
Labor rates vary modestly across San Antonio, but there are some regional patterns worth knowing.
- Inside Loop 410 (Alamo Heights, Terrell Hills, Monte Vista): Older homes, many with masonry exteriors. Expect the most reframing and finish work. Add 10 to 15% to labor compared to the city average.
- Far North and Northwest (Stone Oak, Dominion, Boerne area): Larger, newer homes. Standard openings are more common, but the doors themselves are often larger, pushing material costs up.
- Northeast Side (Converse, Live Oak, Universal City): A mix of 1970s-2000s builds. Mid-range material costs, moderate labor.
- Far West Side (Alamo Ranch, Westover Hills): High volume of newer construction. Standard opening sizes, competitive labor rates, lower reframing incidence.
- South Side and Southeast (Southtown, Brooks, Mission del Lago): Older housing in pockets, historically underserved by contractors. Availability can affect pricing; some companies charge travel or minimums.
These are patterns, not promises. Every house is different. The only way to know your actual price is to get a written quote based on your home’s specific measurements and conditions. We provide those free. Call (361) 348-8929 and we’ll walk through what you’re replacing, what you want, and what it will cost, all on paper.
Labor Costs for Patio Door Installation in San Antonio
Labor for a standard patio door replacement in San Antonio runs $600 to $2,500 depending on the complexity. A straight swap, old door out and new door in the same rough opening, takes a two-person crew about four to six hours. That’s the $600 to $1,200 range.
Add any of the following and you’re climbing toward the high end:
- Rough opening needs reframing (+$300 to $800)
- Stucco or brick patching around the frame (+$200 to $1,200)
- Second-story access or difficult site conditions (+$200 to $500)
- Custom door sizes requiring field trimming (+$150 to $400)
- Old door is unusually heavy or safety glass removal is required (+$100 to $300)
Be wary of any quote that comes in well below $600 for labor on a patio door. That usually means a crew that’s cutting corners on flashing, sealing, and insulation. Improperly flashed patio doors leak. In San Antonio, we get powerful rain events, and a poorly sealed door frame means water intrusion into the wall cavity. That leads to rot, mold, and repairs that cost far more than the original install saved you.
Hale Windows San Antonio has been handling San Antonio door and window work since 2009. Every install crew follows the same build sequence, every job gets the same attention to flashing and sealing, and every job carries our 365-Day Done Right Promise: if it’s not done right, we make it right. No argument needed.
Brand and Product Pricing: What Do PGT, CGI, and Therma-Tru Actually Cost?
We install and service patio doors from eight professional-grade brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Here’s what you should expect to pay for doors from the brands most relevant to patio door work in San Antonio.
- PGT sliding patio doors: $1,800 to $4,500 installed. PGT is a Florida-based brand built for hurricane country. Their WinGuard and similar lines are impact-rated and carry strong wind-load certifications. In San Antonio, you’re not facing hurricanes, but the same engineering shrugs off hailstones and flying debris from severe thunderstorms.
- CGI sliding patio doors: $2,200 to $5,500 installed. CGI is another impact-rated manufacturer. Their doors tend to have thicker glass and more robust frames. Expect excellent aluminum construction and premium pricing.
- Therma-Tru French patio doors: $2,500 to $6,500 installed. Therma-Tru is best known for fiberglass entry doors, and their French door lines hold up well in San Antonio’s humid summers. Fiberglass won’t rot, warp, or swell like wood.
- ES Windows and ECO Window Systems: $1,500 to $4,000 installed. These lines offer solid aluminum and vinyl options at mid-range prices. Good value if you want a clean, modern look without paying for impact certification you may not need.
- Mr-Glass and ViewLux: $1,200 to $3,500 installed. Budget-friendly to mid-range lines that still offer low-E glass and decent frame quality.
- CWS: $1,500 to $4,000 installed. CWS offers hurricane-resistant and energy-efficient products primarily for the Gulf Coast market. Good option if you want storm-rated performance at a slightly lower price point than PGT or CGI.
We quote multiple brands rather than pushing one. The right door for a 1950s brick ranch in Dellview is different from the right door for a 2018 build in Alamo Ranch. We’ll tell you what fits your opening, your climate exposure, and your budget, and put it all in writing before any work is scheduled.
Do You Need a Permit for Patio Door Installation in San Antonio?
Replacement of a patio door in an existing opening, with no structural changes, typically does not require a permit in San Antonio. The city’s Development Services Department considers like-for-like door replacement to be routine maintenance.
However, if you’re widening the opening, adding a new opening where none existed, or altering the header above the door, you’ll likely need a permit. Structural changes must be reviewed for load-bearing integrity. The permitting process adds $150 to $400 in fees and anywhere from a few days to a few weeks depending on city workload.
A qualified installer will tell you upfront whether your project needs a permit. If someone tells you to skip a required permit, walk away. Unpermitted structural work becomes your problem when you sell the house.
How to Save on Patio Door Installation
Patio door replacement isn’t cheap, but there are legitimate ways to keep the price reasonable without gambling on quality.
- Keep the existing opening size. The single most expensive choice you can make is enlarging or moving an opening. Stay with the current rough opening dimensions and you avoid reframing, engineering, and permit costs.
- Choose the right glass package for your situation. Low-E is essential in San Antonio. Impact glass is not mandatory unless you have specific concerns about storm debris or want the security benefit. Don’t pay for impact ratings if you don’t need them, but don’t skip low-E to save $200.
- Bundle projects. If you’re replacing the patio door anyway, consider whether other windows or doors in the house need attention. Bundling saves on mobilization, scheduling, and sometimes unit pricing. We regularly quote multi-opening jobs for less per unit than single-door replacements.
- Ask about mid-tier brands. You don’t always need the top-spec door. ECO Window Systems and Mr-Glass offer solid quality at lower prices than premium impact brands. A good installer will show you options across price points rather than starting at the top.
- Get a written quote before work starts. This may sound obvious, but it’s the most powerful cost-control tool you have. A written price locks in the scope. No surprise line items halfway through. Hale has done written-before-work pricing since day one.
One more thing worth naming directly: free estimates. We’ll assess your current door, measure the opening, discuss your options, and put a full price in writing for exactly $0. Call (361) 348-8929 to schedule a visit. You’ll know who’s coming before they arrive, because our Threshold Standard means every technician is background-checked, identity-verified, photo-badged, and sent to you by name and photo before the visit. You’ll know exactly who is at the door before you open it.
Is It Cheaper to Repair or Replace a Patio Door?
Patio door repair in San Antonio runs $150 to $700 for common issues like roller replacement, track cleaning, handle and lock repair, and weatherstripping. If the repair is under $500 and the door frame and glass are in good shape, repair is almost always the smarter financial move.
But when repair pushes past half the cost of a new door, or when the door itself has failed, think about replacement. Common signals that replacement is warranted:
- The door frame is rotted, warped, or pulling away from the wall
- The glass is fogged or the seal has failed (visible condensation between panes)
- The door is original to a home built before 2000 and lacks low-E glass
- Multiple components have failed at once (rollers, lock, frame, weatherstripping)
- You’re dealing with a security concern from an outdated latch or thin glass
Every repair we do at Hale Windows San Antonio comes with a written guarantee. If the repair fails, the second visit is free. That’s the standard, not an upsell.
FAQs – Patio Door Installation Cost
How much does a basic sliding patio door cost installed in San Antonio?
A basic vinyl sliding patio door, 60 by 80 inches, typically costs $1,800 to $2,800 installed in San Antonio. That includes the door, labor, sealing, and haul-away of the old unit. Call (361) 348-8929 for an exact written quote, free of charge.
What’s the cheapest type of patio door to install?
A standard vinyl sliding door is the least expensive patio door option, running $1,800 to $2,800 fully installed. French doors start around $2,500, and multi-slide doors rarely come in under $7,000. If budget is the priority and you don’t need a wide opening, a slider is the practical choice.
How long does patio door installation take?
A standard sliding patio door replacement takes four to six hours for a two-person crew, start to finish. French door installations typically take six to eight hours. Custom work, structural changes, or stucco repair can extend the job to two days. We schedule a specific arrival window and tell you who’s coming by name and photo before we ring the bell.
Does homeowners insurance cover patio door replacement?
Homeowners insurance may cover patio door replacement if the damage was caused by a covered peril like a storm, hail impact, or break-in. Normal wear and tear, seal failure, or age-related deterioration is generally not covered. If your door was damaged by a storm, document it and contact your insurer before scheduling work.
Can you install a patio door in a brick house?
Yes. Brick and stucco exteriors are common in San Antonio, and we handle them regularly. The key is careful measurement and finish work around the opening. Brick homes in older neighborhoods like Monte Vista or Jefferson often need some patching or trim work around the new frame, which adds $200 to $1,200 depending on condition. We account for that in the written quote before work begins.
Do you offer free estimates for patio door installation in San Antonio?
Yes. Estimates are free, and the price we give you is the price on paper before any work starts. No surprises on the invoice. Call (361) 348-8929 to book a visit.
Why Written Pricing Matters When You’re Choosing a Patio Door Installer
San Antonio has no shortage of contractors willing to replace a patio door. The difference is in how they price and what they stand behind.
At Hale Windows San Antonio, our process is simple and it’s non-negotiable. You get a written price before any work starts. Every time. No verbal estimates that creep upward, no “we’ll see when we get in there.” We measure, we assess, we quote, and we honor that quote.
If the work isn’t right, our 365-Day Done Right Promise means we make it right. That’s the whole promise, not a partial warranty with fine print. If a repair fails within the year, we come back free. That’s how we’ve operated since 2009, and it’s why homeowners who value knowing exactly who’s coming to their door and exactly what they’ll pay keep calling us back.
If you’re ready to talk about a patio door, or if you’re just wondering what your options are, call us at (361) 348-8929. A live person answers, 24 hours a day, seven days a week. No voicemail, no callback queue. Tell us what you’re working with, and we’ll help you figure out the right next step, whether that’s repair or replacement.
For a deeper look at what a patio door project involves from start to finish, visit our Patio Door Installation in San Antonio page. If you’re also considering window work, our home page has an overview of everything Hale Windows San Antonio offers.
Pricing reflects the San Antonio market as of 2026. Hale Windows San Antonio offers free estimates – call (361) 348-8929.
Written by Spencer Odell, Owner at Hale Windows San Antonio, serving San Antonio homeowners since 2009.
Six Reasons Homeowners Choose Hale Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Hale Windows San Antonio Services
What Neighbors Say About Hale Windows San Antonio
What Our Customers Say
"Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."
- Hank V."Front door replacement. Measured twice, had it hung square, and weatherstripped. No more drafts under the door."
- Jeff R."Energy bills dropped noticeably after the replacement. Install was neat and trimmed properly."
- Gabriela L.