New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Antonio pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Kirby
If you live in Kirby, you’re likely dealing with windows that were installed when your home was built, which for most of this area means sometime between the 1950s and the 1980s. Those original single-pane aluminum frames have spent decades fighting South Texas sun, high humidity, and the occasional hailstorm, and most of them have lost that fight. We replace them with dual-pane, impact-rated windows sized and flashed correctly for Kirby’s specific conditions, including homes on acreage with Bexar County permit requirements rather than city code. Call (361) 348-8929 for a free estimate, and we’ll put a written price in your hands before any work starts.
Why Hale Windows San Antonio Is Kirby’s Preferred Window Replacement Company
Hale Windows San Antonio has been installing and servicing windows and doors since 2009, and the Kirby jobs we take on tend to come with a different set of questions than work inside San Antonio city limits. Homeowners here want to know whether a window replacement on unincorporated acreage triggers Bexar County inspections, whether their septic system has any bearing on where we can stage equipment, and whether the quote they get from a city contractor actually accounts for the realities of an open lot. We answer those questions before we quote, because a written price that ignores county permit fees or long material hauls isn’t a real price.
Every technician we send to a Kirby home has been background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the truck pulls up. That’s our Threshold Standard, and it matters here as much as anywhere. You’ll know exactly who is coming to your door before you open it. And every job, from a single sash replacement to a full-frame install, carries our 365-Day Done Right Promise: if the work is not right, we make it right, no argument needed.
Our Window Replacement team has worked on ranch-style homes off Ackerman Road, on brick veneer houses near the older sections of town, and on newer builds that still carry builder-grade windows that underperform in a Kirby summer. We know what fails here, and we know what holds up.
Window Glass Replacement in Kirby
Window Glass Replacement in Kirby usually means pulling a failed insulated glass unit, or IGU, and installing a new dual-pane unit with a low-E coating (a thin layer that blocks heat while letting light through). The most common reason we’re called out is moisture between the panes, which in Kirby is frequently not a manufacturing defect. It’s hail damage. A storm rolls through, a stone hits the glass, the seal fails, and within weeks condensation shows up between the panes. Homeowners often mistake that for humidity or a bad window, but once the seal is gone, the glass has to be replaced.
What It Costs in Kirby
Replacing the glass pack in a standard double-hung or casement window in Kirby typically runs $180 to $340 per window for the glass and labor. Larger picture windows or windows with unusual dimensions push that toward $400 to $600. If the sash itself is corroded or the frame is out of square, glass-only replacement won’t solve the problem, and we’ll tell you that before you spend money on glass that won’t seat properly.
When to Repair Instead of Replace
If the frame is solid and the sash operates smoothly, glass replacement is the right call. We write the repair guarantee on the invoice, and if that repair fails, the second visit is free. That’s our stated policy, not a verbal promise.
Window Sash Replacement in Kirby
Window Sash Replacement in Kirby comes up most often on homes where the original aluminum frames have corroded at the corners, a direct result of decades of high humidity and thermal expansion. The sash is the moving part of the window that holds the glass. When the corner joints weaken, the sash no longer seals against the frame, air leaks in, and your cooling system works harder every afternoon. We replace the sash with a properly sized unit that seats tight and carries a new glass pack.
Matching the Sash to the Frame
On older Kirby homes, particularly ranch-style builds with non-standard openings, a replacement sash has to be measured to the actual frame dimensions, not the window’s original spec sheet. Frames shift over time. We measure every opening before we order, so the new sash fits the opening that exists, not the opening that was drawn in 1967.
When a Full Replacement Makes More Sense
If the frame itself shows corrosion or rot, especially around the lower corners, putting a new sash into a failing frame is throwing good money after bad. In those cases we’ll quote a full-frame replacement and show you the difference in writing. You decide with real numbers in front of you.
Trusted Brands We Service in Kirby
We install and service windows and doors from eight professional-grade lines, and we match the product to the job rather than pushing one brand on every home. For Kirby’s heat and hail exposure, we frequently recommend PGT impact-rated windows for their track record in hail-prone South Texas, Mr-Glass insulated units for glass-pack replacements where the frame is still solid, and Therma-Tru for front door replacements that have to hold up to direct afternoon sun. Because we work with these brands regularly, we can source the specific parts Kirby homeowners need without the weeks-long waits that come with special orders from a big-box store.
Common Window Replacement Problems We See in Kirby Homes
- Corner corrosion on original aluminum frames. Years of humidity in Kirby cause the aluminum to pit and weaken at the corners, which lets air in and makes the sash bind when you try to open it. This is a frame-level failure, not a glass problem.
- Hail-damaged seals mistaken for condensation. After a storm, moisture between the panes often gets blamed on humidity. In Kirby, it’s usually a failed seal from impact, and it won’t clear up on its own.
- Improperly flashed replacements in brick veneer homes. Many of Kirby’s homes are brick veneer over wood framing. If the replacement window isn’t flashed correctly at the sill and jamb, water wicks in and rots the rough opening before you notice anything wrong.
- High solar gain through single-pane glass. Single-pane aluminum windows offer almost no resistance to solar heat. On an acreage lot with no shade, the afternoon sun turns a living room into an oven and the AC never shuts off.
Pricing for Window Replacement in Kirby, TX
For Kirby homes, a standard insert window replacement generally runs $450 to $850 per window depending on size, glass package, and whether we’re matching an existing frame or doing a full-frame swap. Full-frame replacements, where the entire window including the frame comes out, typically run $800 to $1,400 per window on a brick veneer home because the flashing, sealing, and trim work is more involved. Glass-only replacement falls between $180 and $340 per window. Impact-rated glass packages from PGT add cost, usually 25% to 40% over standard dual-pane, but on an open lot with no shade, that’s often the difference between a window that lasts and one that fails after the next hail season. Estimates are free, and the price we quote is the price you pay. Call (361) 348-8929 to schedule yours.
One thing that genuinely changes the price in Kirby is the site itself. Homes on unincorporated acreage mean Bexar County permit fees instead of city fees, longer equipment hauls, and sometimes the need to stage materials away from a septic drain field or well head. We walk the site before we quote, because a price written without seeing the lot isn’t a price worth having.
We Also Serve Cities Near Kirby
While this page is written for homeowners in Kirby, our crews also run replacement and repair jobs in San Antonio, Boerne, Live Oak, and Cibolo. The same written pricing, Threshold Standard technician verification, and 365-Day Done Right Promise apply everywhere we work.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Kirby
Yes, most window replacements on Kirby acreage fall under Bexar County permit requirements rather than San Antonio city code, and the county may inspect structural changes to openings, especially when a full-frame replacement makes the opening larger. We pull the permits, schedule the inspections, and make sure the work passes before we call the job complete. Call (361) 348-8929 and we’ll confirm what applies to your specific lot.
Window replacements don’t change your septic or well setbacks, but the way we stage equipment and materials does. We keep trucks, lifts, and material drops clear of drain fields and well heads by design, and we confirm those locations with you before we arrive. That’s a site-level concern most city-lot contractors never think to ask about.
Moisture between the panes after a hailstorm typically means the insulated glass unit’s seal failed from impact, not condensation. Once that seal is gone, the gas between the panes leaks out and moisture gets in, and the only permanent fix is replacing the glass pack or the sash. We see this on nearly every older Kirby home after a serious storm.
Yes, and the difference is measurable on Kirby lots with no tree cover. Impact-rated windows from PGT with a high solar heat gain coefficient (SHGC) rating block more solar heat while letting light through, which means your AC doesn’t run as hard on a 100-degree afternoon. Homeowners on open lots consistently report lower cooling draw after swapping single-pane aluminum for dual-pane, low-E impact glass.
For Kirby’s specific conditions, we recommend PGT impact-rated windows more than any other brand. They’re built for South Texas hail patterns, their frames handle thermal expansion without warping, and the glass packages include a low-E coating. Mr-Glass is our go-to for glass-pack replacements in frames that are still solid.
Written by Spencer Odell, Owner at Hale Windows San Antonio, serving Kirby and the surrounding area with honest pricing and the 365-Day Done Right Promise.
Ready for a real price on window replacement in Kirby? Call (361) 348-8929 today to schedule your free estimate. We’ll send you the name and photo of your technician before they arrive, and the written price before any work begins.
Six Reasons Homeowners Choose Hale Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.